Solar Tower 1

Solar Tower 1 testing at the National Solar Thermal Test Facility (NSTTF) supports large-scale high flux and concentrating solar power testing, including heliostat optics, high-temperature receivers, heat transfer medias, and flux environment testing.​

Current Features and Capabilities: 

  • Peak irradiance of up to 300 watts per square centimeter
  • Maximum temperatures of 2,500 degrees Celsius
  • Spot diameter 1-plus meter, adjustable aim and point strategy
  • 214 heliostats up to 5 megawatts thermal power
  • 400-ton capacity lift ground-floor to roof
  • Four test bays (120-foot, 140-foot, 160-foot, and Tower Top)
  • Infrared and beam characterization systems
  • Access to Sandia Restricted Network

Solar Tower 1 and the heliostat field at the National Solar Thermal Test Facility.

Camera and Beam Characterization Systems

Infrared Camera

  • 5.00 micrometer pixel size
  • Spectral range: 400 to 1700 nanometers
  • Goldeye G-130 VSWIR TEC1 Infrared Camera
  • Resolution: 1,280 x 1,024 (1.3 megapixels)
spot analysis, beam characterization system

Sandia’s Beam Characterization System (BCS)

  • Evaluates beam distribution
  • Identifies maximum flux point

Test Bays

Capabilities

AspectDetails
Beam and Power Area• Peak irradiance of 200 watts per square centimeter
• Maximum temperature of 2,500 degrees Celsius
• Spot diameter of more than 1 meter, and adjustable
Data Acquisition • Up to 16 thermocouples
• Sandia Beam Characterization System
• Infrared Goldeye G-130 camera
• NI DAQ+ control system
• Pre- and post-exposure flux measurement
Utilities• 120 volts, 208 volts, and 480 volts power
• 1.5-megawatt chiller access
• Onboard chiller capabilities
Other Capabilities• One-ton hoist on deck
• Perform four- to six-hour long test profiles
• Basic hand tools and fabrication shop on-site

AspectDetails
Beam and Power Area• Peak irradiance of 200 watts per square centimeter
• Maximum temperature of 2,000 degrees Celsius
• Spot diameter of 1 to 2 meters, and adjustable
Test Stand and Shutter • Four-foot-wide custom items
• Four samples measuring approximately 3 by 4 by 0.25 inches
• 0.3 Mach wind tunnel with 0.5-second flash
Data Acquisition• Up to 12 thermocouples
• Sandia Beam Characterization System
• Infrared Goldeye G-130 camera
• In situ peak flux measurement
• National Instruments data acquisition and control system
Utilities• 120 volts, 208 volts, and 480 volts power
• 1.5-megawatt chiller
• City water
Other Capabilities• Basic hand tools and fabrication shop on-site
• 1-ton hoist on deck
• Wind tunnel must be removed to test larger items

AspectDetails
Data Acquisition Capabilities• Wall pass through for data acquisition access​
• Infrared Goldeye G-130 camera
• Sandia Restricted Network access
• National Instruments data acquisition and control system
Utilities• 120 volts, 208 volts, and 480 volts power
• Temperature-controlled computing area
• 200-square-foot open-air deck with furnace-lined floor
Other Capabilities• Basic hand tools and fabrication shop​
• Secure testing availability​

Solar Tower 1’s Tower Top supports large scale high flux and high temperature materials and thermal shock testing. ​

AspectDetails
Beam Area and Power• Peak irradiance of 300 watts per square centimeter
• Maximum temperature of 2,500 degrees Celsius
• Spot diameter of more than 1 meter, adjustable
Hydraulic Test Stand• Hydraulic stand ​
• Maximum weight of 350 pounds​
• Programmable thermal test profiles​
Data Acquisition Capabilities• Up to 16 thermocouples ​
• Sandia Beam Characterization System
• Infrared Goldeye G-130 camera
• National Instruments data acquisition and control system
• Pre- and post-exposure flux measurement
Utilities• 120 volts, 208 volts, and 480 volts power
• 1.5-megawatt chiller access
• Onboard chiller capabilities
Other Capabilities•Gas flow of 85 standard cubic feet per minute
• Gas chemistry by bottle
• Machine shop on-site
• Secure testing availability
• Perform four- to six-hour test profiles
• Basic hand tools and fabrication shop on-site

Project Examples

Contact

Rob Keene, Manager, National Solar Thermal Test Facility
rskeene@sandia.gov