About the Facility
In 2013, the U.S. Department of Energy commissioned the SWiFT facility to provide an experimental site with research-scale turbines for studying wind turbine wakes and turbine-turbine interactions on a realistic scale. The site is strategically located in Lubbock, Texas, a region with a high wind resource and low turbulence, which is ideal for research. Test-scale turbines, access to Texas Tech’s atmospheric observation tools, and other site facilities enable Sandia and its partners to conduct both collaborative and proprietary testing.
Two turbines are spaced three rotor diameters apart, perpendicular to the oncoming wind. The third turbine is five rotor diameters downwind. This turbine configuration is ideal for studying complex wake flows.
The site has capacity for seven additional research-scale turbines in the future.
A 60-meter meteorological tower is located two and a half rotor diameters directly upwind of each of the front two turbines. They are equipped with research-grade, 3D sonic anemometers to measure the inflow at six levels, including one that is a blade length above the rotor. Additional site facilities include the Texas Tech 200-meter tall meteorological tower.
Doppler radar technologies and techniques developed at Texas Tech have potential to revolutionize wind energy generation by providing comprehensive information about the modulated flows within a wind farm. Documenting the structure and evolution of complex flows within wind farms will lead to increased efficiency as
turbine wakes are fully characterized,
- turbine-turbine interactions are defined,
- transient wind events are proactively identified,
- the effects of local terrain are documents, and
- turbine inflows are adequately characterized.
Current Research: Wind Plant Optimization
In large wind farms, turbines “shadow” one another, creating wakes that reduce turbine output and increase fatigue issues that impact longevity and reliability. As the first public facility to use multiple turbines to measure wind turbine wake interactions, SWiFT plays a key role in the U.S. Department of Energy’s Atmosphere to Electrons (A2e) program, which is a national effort to improve wind plant performance. SWiFT’s current research focuses are:
- Wake energy loss
- Wake-induced loads
- Advanced rotor development
- Turbine control in wind farms
- Advanced sensing
The SWIS uses Doppler Global Velocimetry (DGV), a method in which laser light is scattered off aerosol particles that trace the flow velocity, shifting the laser-light to higher or lower frequencies. This frequency shift is recorded by specialized cameras and the data are processed to produce instantaneous images of the flow velocity. Because of its high-spatial resolution (16,000 data points per sample) and ability to capture 3D flow structures, the SWIS will produce novel experimental data to help researchers better understand fundamental wind turbine wake phenomena and to validate computational codes and design tools that will be used to improve utility wind plant performance.
Contact: Brian Naughton
Sandia develops tools to help wind plant operators and planners more accurately predict a plant’s power production and understand potentially damaging blade loading scenarios. Sandia applies high fidelity modeling capabilities and uncertainty quantification techniques, originally developed for weapons research, to reduce uncertainties in wind plant operations. In particular, the Nalu computational fluid dynamics code is emerging as a basis for a next-generation wind plant flow modeling capability that will be exercised on the nation’s largest supercomputers. Under development in collaboration with other national laboratories and validated by experiments at SWiFT and other facilities, this capability will enable operators and developers to predict blade health, power production, and plant costs more accurately, thereby reducing the overall cost of wind energy.
Contact: David Maniaci
Sandia designed the National Rotor Testbed (NRT), a research-scale blade, to replicate the wake of utility-scale rotors on a smaller, more cost-effective scale. The blade set, which was manufactured from the first-ever 3D printed wind turbine blade mold, will be used for experimental campaigns at SWiFT.
Contact: Joshua Paquette
Using historical data from the Texas Tech University 200m meteorological tower, Sandia researchers analyzed the frequency and magnitude of atmospheric conditions at SWiFT. The results of the analysis summarize the bulk atmospheric conditions, such as the variable averages and distributions and the SWiFT turbine International Electrotechnical Commission (IEC) design classification. This information will enable modelers to simulate the site using probable conditions and, thereby, inform the design of experimental campaigns.
The final report summarizing the analysis can be downloaded here: SWiFT Site Atmospheric Characterization.
Contact: Brandon Ennis
- Christopher L. Kelley and Brandon L. Ennis, “SWiFT Site Atmospheric Characterization,” Sandia National Laboratories, Albuquerque, NM, Jan.2016, SAND2016-0216.
- David C. Maniaci and Brandon L. Ennis, “Atmospheric Instrumentation at SWiFT and the Surrounding Area,” for the A2e Meso-micro Meeting, Jan. 2015, SAND2015-0395PE
- White, Jonathan; Berg, Jonathan Charles; Maniaci, David Charles; LeBlanc, Bruce Philip.; Naughton, Brian Thomas; Paquette, Joshua A.; Resor, Brian Ray; Bryant, Joshua; Kroeker, David, “Scaled Wind Farm Technology Facility Overview,” Sandia National Laboratories, Albuquerque, NM, Dec.2013, SAND2013-10632C.