Instrumentation of a WEC Device for Controls Testing 2018-07-30T21:56:01+00:00

All Publications

Filename SAND2015-8089C.pdf
Filesize 1 MB
Version 1
Date added December 16, 2015
Downloaded 293 times
Category Energy Efficiency, Marine Hydrokinetic (MHK), Modeling and Analysis, Renewable Energy, Water Power, Wave Energy
Tags SAND2015-8089C
author Patterson, David; Bull, Diana; Bacelli, Giorgio; Coe, Ryan
year 2015
event-name 3rd Marine Energy Technology Symposium
event-location Washington D.C.
slide_template default

Spatial variability of sea states is an important consideration when performing wave resource assessments and wave resource characterization studies for wave energy converter (WEC) test sites and commercial WEC deployments. This report examines the spatial variation of sea states offshore of Humboldt Bay, CA, using the wave model SWAN. The effect of depth and shoaling on bulk wave parameters is well resolved using the model SWAN with a 200 m grid. At this site, the degree of spatial variation of these bulk wave parameters, with shoaling generally perpendicular to the depth contours, is found to depend on the season. The variation in wave height, for example, was higher in the summer due to the wind and wave sheltering from the protruding land on the coastline north of the model domain. However, the spatial variation within an area of a potential Tier 1 WEC test site at 45 m depth and 1 square nautical mile is almost negligible; at most about 0.1 m in both winter and summer. The six wave characterization parameters recommended by the IEC 62600-101 TS were compared at several points along a line perpendicular to shore from the WEC test site. As expected, these parameters varied based