Energy and Climate

Transmission Grid Integration

Wind Generator Modeling

Sandia finalized and submitted the updated “WECC Wind Power Plant Dynamic Model­ing Guide” and the “WECC PV Power Plant Dynamic Modeling Guide” to the Technical Studies Subcommittee at the Western Elec­tricity Coordinating Council (WECC). These dynamic modeling guides present the second-generation generic models as speci­fied in the January 23, 2014 WECC report. The WECC generic […]

Sandia Contributes to International Electrotechnical Commission IEC 61400-26 Availability Standard

The U.S. Department of Energy Wind Program and Sandia have been working with the International Elec­trotechnical Commission (IEC) Committee on Wind Turbine Availability to develop three specifications for IEC-61400-26―the standard that addresses wind turbine and wind-plant availability. The first specification is on the definitions of operating states and availability conditions and was published in 2011. […]

Renewables, Other Energy Issues To Be Focus of Enhanced Sandia-SINTEF Collaboration

Under an expanded agreement, a decades-long partnership between Sandia and the Norwegian research organization SINTEF (Stiftelsen for industriell og teknisk forskning) will now tackle energy challenges such as renewable-energy integration, grid modernization, gas technologies, and algae-based biofuels. SINTEF is the largest independent research organization in Scandinavia, with expertise in the natural sciences and technology, the […]

DOE Office of Electricity Delivery & Energy Reliability (OE) Energy Storage Safety Workshop

On February 17–18, 2014, Sandia National Laboratories and Pacific Northwest National Laboratory co-hosted the DOE OE Energy Storage Safety Workshop in Albuquerque, NM. This workshop’s goal was to address the need for validated energy-storage safety as identified in the DOE strategic plan for “Grid Energy Storage.” Thought leaders in the fields of deployment, operation, regulation, […]

Sandia, DOE Energy Storage Program, GeneSiC Semiconductor, U.S. Army ARDEC: Ultra-High-Voltage Silicon Carbide Thyristors

Increasing consumer power demand creates numerous challenges for ensuring reliable, stable power for all customers. Many energy generation technologies, particularly renewables, generate direct-current power that must be converted to alternating current before use. Power switches, known as thyristors, perform this conversion and are crucial to a reliable electricity grid. Current switches have been inefficient and […]

Page 1 of 212
Feedback

Feedback