Energy and Climate

Nuclear Energy

Protected: Previous US/German Workshops

On April 15, 2014, in

There is no excerpt because this is a protected post.

Protected: Past Presenters at the US/German Workshops

On April 15, 2014, in

There is no excerpt because this is a protected post.

Protected: US/German Workshop on Salt Repository Research, Design, and Operation

On April 15, 2014, in

There is no excerpt because this is a protected post.

Mechanical Testing

On March 26, 2014, in

Mechanical Testing Overview  ASTM standard (E8) used for tension testing guidance, with tests in constant displacement mode 2 tests were performed, room temperature and at 650°C Post mortem metallography was performed on both samples Room Temperature Tensile Test  Room Temperature Metallography Voids were observed in bond lines away from fracture surface. Unclear if voids were […]

Diffusion Bonding Characterization

On March 26, 2014, in

Diffusion Bond Characterization  Research Goal:  Diffusion bond strength, defects, and corrosion behavior must be understood before they can be reliably used in reactor systems.              Diffusion Bond Process Plates were chemically cleaned and electroplated with nickel to prevent surface oxidation which would impair bonding process Actual process variables are proprietary […]

Page 1 of 612345...Last »